CAT Mini Excavator 301.5 Specifications (Engine 21 HP, Weight 3913 lb, Speed) Attachments

CAT Mini Excavator 301.5 Overview:

This Cat Mini Excavator 301.5 delivers more power and performance in a compact machine size. This excavator falls in the Machine class of 1 Ton and the detailed specifications of this best-quality Excavator from the CAT brand are mentioned below. The net power of this compact-size excavator is 15.7 kW and the gross power is 16.1 kW. This 301.5 excavator gives maximum performance with minimum operation cost with the latest 301.5 features and a next-generation LCD monitor which makes it easy to operate for the driver.

Engine
21 HP

Fuel Tank Capacity
22 liters

The CAT 301.5 engine model is C1.1 with a displacement of 1.1 l and a bore size is 77mm. The operating weight is 1775 kg and the dig depth is 2540mm and the maximum blade height is 275 mm. The maximum dig height is 3490 mm and the maximum reach of 301.5 is 3960 mm. The rubber track and other parts are also available from the dealers for the 301.5 model. CAT 301.5 Swing pump and swing motor can be purchased from the official dealers.

C H E C K A L S O: CAT Mini Excavator 300.9D (Engine 13 HP)

The overall CAT Mini Excavator 301.5 shipping length is 3590mm and the maximum dump clearance is 2510 mm. CAT 301.5 blade width is 39 inches and height is 8.9 inches. The swing bearing height is 17.5 inches and the boom swing from the left is 65°. The minimum ground clearance below the undercarriage is 6.1 inches. CAT dual lock pin grabber couplers allow operators to change different attachments in seconds. This technology makes this machine do multiple tasks in an efficient way.

CAT Excavator 301.5 Features:

Mini Size Excavator
Maximum Performance
Low Operating Cost
Easy Maintenance
Adjustable wrist rests
Auto Engine Shutdown
High Comfortability
Next-Generation LCD Monitor (Easy to operate)
Stick Steer Option
Retractable Undercarriage
Safety Features

CAT Mini Excavator 301.5 Full Specifications (Engine 21 HP, Weight 3913 lb) Attachments:

Brand	CAT
Model	301.5
Gross Power	21.6 hp / 16.1 kW
Net Power	15.7 kW (2400 rpm)
Operating Weight	1775 kg / 3913 lb Maximum
Dig Depth	100 inch
Engine Model	C1.1
Bore	3 inch
Stroke	3.2 inch
Engine Oil	4.4 liter
Displacement	1.1 liter
Emissions	Tier 4 Final (Meets U.S. EPA)
Emissions	Stage V (EU Emission Standards)
Cooling System Refill	3.9 liter
Hydraulic System Oil	26 liter
Hydraulic Tank Oil	18 liter
Fuel Tank Capacity	22 liter
Machine Swing Speed	9.8 r/min
Exterior Sound Pressure Average	93 dB (A) (ISO 6395:2008)
Canopy – Top Guard	ISO 10262:1998 Level 1
Canopy – Roll Over Protective Structure	ISO 12117-2:2008 (ROPS)
Canopy – Tip Over Protective Structure	ISO 12117:1997 (TOPS)
HYDRAULIC:
Operating Pressure	103 bar (Swing)
Hydraulic Type	Load Sensing Hydraulics with Variable Displacement Piston Pump Type
Pump Flow	66 l/min. at 2400 RPM
Operating Pressure	213 bar (Travel), 213 bar (Equipment)
Auxiliary Circuit	33 l/min (Primary Flow), 14 l/min (Secondary Flow)
Digging Force Bucket	14.1 kN
Digging Force Stick	8.2 kN (Standard)
BLADE:
Width	39 inches (Expanded 51 inches)
Height	8.9 inches
TRAVEL:
Travel Speed High	4.4 km/h
Travel Speed Low	2.9 km/h
Ground Pressure Min. Weight	27.3 kPa
Ground Pressure Max. Weight	30.6 kPa
Traction Force – High Speed	10.3 kN (Maximum)
Traction Force – Low Speed	16 kN (Maximum)
Dimensions:
Stick Length	1160 mm (45.7 inches)
Dig Depth	2540 mm (100 inches)
Dig Height	3490 mm (137.4 inches) Maximum
Blade Height	275 mm (10.82 inches) Maximum
Blade Depth	260 mm (10.23 inches) Maximum
Boom Height	1040 mm (40.94 inches) Shipping Position (Also depends on blade position during shipping)
Boom in Reach	1450 mm (57.1 inches)
Tail Swing	820 mm (32.28 inches)
Track Width	1300 mm (51.2 inches) Expanded
Undercarriage Length	1460 mm (57.5 inches) O/A
Shipping Height	2310 mm (91 inches) O/A
Ground Level Reach	3890 mm (153.2 inches) Maximum
Dump Clearance	2510 mm (98.9 inches) Maximum
Boom Swing Right	50 degree
Boom Swing Left	65 degree
Below Undercarriage Ground Clearance	155 mm (6.1 inches) Minimum
Swing Bearing Height	445 mm (17.6 inches)
Vertical Wall	1890 mm (74.4 inches)
Track Belt / Shoe Width	230 mm (9.1 inches)

Disclaimer: Dear visitor, We tried our best but we cannot guarantee that the specifications on this page are 100% correct (Human error is possible). For 100% correct specs always visit the nearest local dealer. All Trademarks, Brand Names, & Logos are the property of their respective owners. Note: Copying and reproduction of content is strictly prohibited.

CAT Mini Excavator 301.5 Hydraulic:

The hydraulic system of the CAT 301.5 excavator consists of different mechanical equipment. The digging force long stick is 7.2 kN and the pump flow at 2400 rpm is 66 l/minute. The auxiliary circuit’s primary flow is 33 l/minute and the secondary pressure is 213 bar. The operating pressure in travel and equipment is 213 bar. The auxiliary circuit’s primary pressure is 213 bar.

Swing Motor:

You can buy swing motors from the official company and different manufacturers also manufacture swing motors of high quality.

CAT 301.5 Speed:

This CAT 301.5 excavator’s high speed is 4.4 km/h and its low speed is 2.9 km/h. The maximum traction force at high speed is 10.3 kN and at low speed is 16 kN. The maximum gradability is 30 degrees.

301.5 Engine:

This 1-ton class mini excavator 301.5 engine model is C1.1 and gross power is 16.1 kW. The net power is 15.7 kW at 2400 rpm. The net power is tested per 80/1269/EEC and ISO 9249:2007 standards.

CAT 301.5 Canopy:

The Roll Over Protective Structure (ROPS) certification of CAT 301.5 is ISO 12117-2:2008 and Tip Over Protective Structure (TOPS) certificate is ISO 12117:1997.

CAT Excavator 301.5 Oil Capacity:

You can refill the fuel tank of the CAT 301.5 excavator up to 22 liters. You need 4.4 liters of engine oil for the lubrication of the 301.1 engine. The refill capacity of a cooling system is 3.9 liters and the hydraulic system refill capacity is 26 liters.

301.5 Battery:

A 12-volt battery comes with this excavator model. The type of battery is maintenance free and warning horns, signaling, monitor, and software run through this battery.

CAT 301.5 Attachments (Optional):

This CAT excavator model is a multifunctional product, you can install or enhance the size of equipment with it. Its related product names are Compactors, Hammers, Digging and other Buckets, Auger Bits, Ditch cleaning buckets, and Thumbs.

Augers:

The supported Augers model is A11.

Buckets:

The supported bucket size of 301.5 is 230mm, 300mm, 400mm, 460mm, 500mm, 600mm, 800mm, and 1000mm. These buckets are designed for multipurpose applications and materials. The interface type of buckets is pin-on.

230 mm Bucket:

The capacity of a 23 0mm bucket is 17 liters. The width of this bucket is 230 mm (9 inches) and its weight is 29.4 kg. The base edge thickness is 10mm and the tip radius is 508.5 mm.

300 mm Bucket:

The capacity of a 300 mm bucket is 22.7 liters. The width of this bucket is 300 mm (12 inches) and its weight is 31.1 kg. The base edge thickness is the same as the 230 mm bucket.

400 mm Bucket:

The capacity of a 400 mm bucket is 34 m³. The width of this bucket is 400 mm (16 inches) and its weight is 35.4 kg. The base edge thickness is the same as the 300 mm bucket.

460 mm Bucket:

The capacity of a 400 mm bucket is 39.59 m³. The width of this bucket is 460 mm (18 inches) and its weight is 37.9 kg. The base edge thickness is the same as the 300 mm bucket.

500 mm Bucket:

The capacity of a 500 mm bucket is 45.29 m³. The width of this bucket is 500 mm (20 inches) and its weight is 40.9 kg. The base edge thickness is the same as the 460 mm bucket.

600 mm Bucket:

The capacity of a 600 mm bucket is 56.59 m³. The width of this bucket is 600 mm (24 inches) and its weight is 45.4 kg. The base edge thickness is the same as the 500 mm bucket.

800 mm Bucket:

The capacity of a 600 mm bucket is 42.5 liters. The width of this bucket is 800 mm (32 inches) and its weight is 40.5 kg. The base edge thickness is the same as the 600 mm bucket.

1000 mm Bucket:

The capacity of a 1000 mm bucket is 56.9 liters. The width of this bucket is 800 mm (40 inches) and its weight is 42.5 kg. The base edge thickness is the same as the 600 mm bucket.

Bucket Teeth:

Different types of bucket teeth are available to perform different tasks. The name of each type is Long, Short, Wide, Light Duty Long, Sharp Corner, Sharp Twin, Penetration, Sharp Center, Abrasion, Heavy Duty Long, and Heavy Duty Abrasion.

Ditch Cleaning Buckets:

These ditch-cleaning buckets are essential for cleaning wide trenches, sloe cutting, loading, and for different useful purposes in construction, and road maintenance. Different models are available for CAT mini excavator 301.5 1 ton from dealers with different capacities and the names of all those models are CW and CW-05.

Compaction Wheels:

The CAT company provides compaction wheels for trench compaction. Different types are available for different types of soil. These compactions are available in 2, 3, and 4 wheels with different numbers of pads.

CAT Excavator 301.5 Hammer:

CAT B2 model is compatible with a machine class of 1 ton. The B2 hammer pin diameter is 1.2 inches and the height without the tool is 30 inches. The overall height is 42 inches, the width is 9 inches, and the length is 15 inches. The minimum operating pressure is 1276 psi and the sound level is 128 dB.

You can also read the CAT mini excavator 301.5 specifications from this image:

How Range